Monday, 20 October 2014

NIGHT VISION INFRARED TECHNOLOGY

Light Basics
In order to understand how thermal imaging works, it is important to understand something about light. The amount of energy in a light wave is related to its wavelength: Shorter wavelengths have higher energy. Of visible light, violet has the most energy, and red has the least. Just next to the visible light spectrum is the infrared spectrum.

light-spectrum

Infrared light can be split into three categories:

Near-infrared (near-IR) – Closest to visible light, near-IR has wavelengths that range from 0.7 to 1.3 microns, or 700 billionths to 1,300 billionths of a meter.
Mid-infrared (mid-IR) – Mid-IR has wavelengths ranging from 1.3 to 3 microns. Both near-IR and mid-IR are used by a variety of electronic devices, including remote controls.
Thermal-infrared (thermal-IR) – Occupying the largest part of the infrared spectrum, thermal-IR has wavelengths ranging from 3 microns to over 30 microns.
The key difference between thermal-IR and the other two is that thermal-IR is emitted by an object instead of reflected off it. Infrared light is emitted by an object because of what is happening at the atomic level.

IR-Vis-Comp

Thermal Imaging – Here’s how it works:

A special lens focuses the infrared light emitted by all of the objects in view.

The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.

The thermogram created by the detector elements is translated into electric impulses.

The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.

The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.

how-thermal-works

Types of Thermal Imaging Devices
Most thermal-imaging devices scan at a rate of 30 times per second. They can sense temperatures ranging from -4 degrees Fahrenheit (-20 degrees Celsius) to 3,600 F (2,000 C), and can normally detect changes in temperature of about 0.4 F (0.2 C).

See:  Thermal Imaging Devices




There are two common types of thermal-imaging devices:

Un-cooled – This is the most common type of thermal-imaging device. The infrared-detector elements are contained in a unit that operates at room temperature. This type of system is completely quiet, activates immediately and has the battery built right in.
Cryogenically cooled – More expensive and more susceptible to damage from rugged use, these systems have the elements sealed inside a container that cools them to below 32 F (zero C). The advantage of such a system is the incredible resolution and sensitivity that result from cooling the elements. Cryogenically-cooled systems can “see” a difference as small as 0.2 F (0.1 C) from more than 1,000 ft (300 m) away, which is enough to tell if a person is holding a gun at that distance!
Unlike traditional most night-vision equipment which uses image-enhancement technology, thermal imaging is great for detecting people or working in near-absolute darkness with little or no ambient lighting (i.e. stars, moonlight, etc, )

Space Station Laser Beams Video Message to Earth

Space lasers have already shown they can beam HD videos from the Earth to the moon and back again. A new NASA demonstration brings the technology a bit closer to home by using a laser communications system to send a "Hello, world!" message from the International Space Station to Earth in approximately 3.5 seconds.

Laser communication could send data  for space missions up to 100 times faster than traditional

Tuesday, 14 October 2014

Magnetic Levitation by magnetic materials

                        

                         MAGNETIC LEVITATION BY USING MAGNETIC MATERIALS

Now a days magnetic levitation is widely used in so many applications as it consumes less energy and can deliver work in high speed







Magnetic Levitation is a way to suspend objects in air without any support, as if in defiance of gravity. An unsung phenomenon of the past which is now being put to use in a variety of interesting and useful applications. As a child we must have seen a ping pong ball being levitated on an air stream at the output pipe of a vacuum cleaner. Magnetic levitation, also known as maglev is used in a similar way to levitate objects in air without any support, using magnetic field. 

Levitation is the process by which an object is suspended against gravity, in a stable position, without physical contact. For levitation on Earth, first, a force is required directed vertically upwards and equal to the gravitational force, second, for any small displacement of the levitating object, a returning force should appear to stabilize it. The stable levitation can be naturally achieved by, for example, magnetic or aerodynamic forces. Though any electromagnetic force could be used to counteract gravity, magnetic levitation is the most common. 

Though any electromagnetic force could be used to counteract gravity, magnetic levitation is the most common. Diamagnetic materials are commonly used for demonstration purposes. 
In this case the returning force appears from the interaction with the screening currents. For example, a superconducting sample, which can be considered either as a perfect diamagnet or an ideally hard superconductor, easily levitates an ambient external magnetic field. In very strong magnetic field, by means of diamagnetic levitation even small live animals have been levitated.